{"product_id":"mounting-plate-for-ego-ch5500-rapid-charger-gearwall-compatible","title":"EGO CH5500 Rapid Charger Wall Plate | Gladiator GearWall \u0026 GearTrack","description":"\u003cp\u003e\u003cstrong\u003eGearWall and GearTrack Mounting Plate for the EGO Rapid Charger: Get It Off the Bench and On to the Wall\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eOut of the box, the CH5500 hangs from two small holes in its own housing, which means drilling into your wall and committing to that spot forever. This plate snaps into the track system you already own. The charger slides down onto the backing plate and seats into place, then reinforcing brackets underneath carry the load from below instead of leaving it to hang.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBuilt for the Track System You Already Own\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for Gladiator Channels and Panels: Designed to snap cleanly into GearWall panels and GearTrack channels for a secure, flush fit.\u003c\/li\u003e\n\u003cli\u003eInstalls in Seconds: Snap the plate into your existing track and slide the charger on. No drilling, no screws, no anchors, no hassle.\u003c\/li\u003e\n\u003cli\u003eReposition Anytime: Slide your charging station along the channel as your wall layout changes or your battery collection grows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEngineered to Carry the Weight\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlide On and Seated: The charger slides straight down onto the backing plate and locks into position. No adapters, no fiddling, no zip ties.\u003c\/li\u003e\n\u003cli\u003eSupported From Underneath: Reinforcing brackets sit beneath the charger and carry the load in compression, which is exactly where plastic is strongest.\u003c\/li\u003e\n\u003cli\u003eReady for the Heaviest Packs: EGO normally rates a loaded charger and battery at up to 10.6 lbs, this is designed to take well over double that. This plate is built and braced to carry it without sag or creep.\u003c\/li\u003e\n\u003cli\u003eTough Construction: Printed in ABS, a durable engineering-grade plastic that holds up to demanding garage, workshop, shed, and contractor trailer conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKey Benefits\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReclaim Your Bench: A charger and a battery take up real estate you would rather use for work. Put them on the wall and get the surface back.\u003c\/li\u003e\n\u003cli\u003eFills the Gap in Your System: Gladiator makes a hook for almost everything except this. Now your charger has a place in the system too.\u003c\/li\u003e\n\u003cli\u003eCharge Where You Store: Set your charging station right beside your battery mounts so the whole system lives on one wall.\u003c\/li\u003e\n\u003cli\u003eClean, Finished Look: A charger sitting square and level on a proper plate looks like it belongs there, because it does.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFitment\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e EGO Power+ rapid chargers — CH5500, CH5500A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not fit:\u003c\/strong\u003e CH2100 \/ CH3200 standard chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBuilt from Professional Grade ABS, Not hobbyist PLA or PETG\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrinted in \u003cstrong\u003eABS\u003c\/strong\u003e, the engineering thermoplastic used for power tool housings. It stays rigid when it gets hot.\u003c\/li\u003e\n\u003cli\u003eMost 3D printed mounts sold today are \u003cstrong\u003ePETG\u003c\/strong\u003e, a hobby-grade filament. In a hot garage, shed, or trailer, PETG softens under the sustained weight of a hanging tool.\u003c\/li\u003e\n\u003cli\u003eThe failure is quiet. Nothing cracks and nothing snaps, so you get no warning — you just walk in one day and find your trimmer on the concrete.\u003c\/li\u003e\n\u003cli\u003eABS is what you use when the tool on the hook costs more than the hook.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* Designed to fit Gladiator GearWall panels and GearTrack channels. \u003cbr\u003e** Mount is not an EGO or Gladiator product and PartForge is not affiliated with, endorsed by, or sponsored by either. GearWall and GearTrack are trademarks of their respective owner and are used only to describe compatibility. The charger and batteries are shown for demonstration purposes only and are not included.\u003c\/p\u003e","brand":"PartForge","offers":[{"title":"Default Title","offer_id":48202836082946,"sku":"MNT-EGO-C55-FGW-001","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/4484\/8386\/files\/CH5500_Gearwall.png?v=1784897644","url":"https:\/\/www.partforgeusa.com\/products\/mounting-plate-for-ego-ch5500-rapid-charger-gearwall-compatible","provider":"PartForge","version":"1.0","type":"link"}